ДЪРВООБРАБОТВАНЕ

Калкулатор за Дървесина (Board Foot) & Разходи

Безплатен инструмент за изчисляване на обем дървен материал в Board Feet (BF) и прогнозиране на разходите за проекта.

Настройки
лв
%

Turn this off if you want to price only the exact boards listed.

Switching units converts the current board list.

Добави Дъска
No data
Add at least one board to see volume and cost.
3D Преглед
3D Преглед1 Дъска | 0 Стекове
Драгнете за въртене. Показва текущата дъска.
Списък за Рязане
Вид (Опция)РазмериОбемЦена
Списъкът е празен
Saved on this device

Save project estimates you may want to compare or reuse later.

Keeps the latest 10 calculations in this browser.

No data
No saved lumber calculations yet.

Ръководство и Информация

Как да използвате инструмента

  1. Настройки: Изберете мерна система, цена и процент фира.
  2. Размери: Въведете размери за всяка дъска. 3D прегледът ще покаже формата.
  3. Преглед: Вижте общия обем и прогнозната цена в таблицата.

Какво е Board Foot?

Board Foot (BF) е единица за обем. 1 BF = 144 кубични инча.

В метричната система просто изчисляваме кубични метри (m³).

Математиката

Имперска (BF):

(Thk_in × W_in × L_ft) ÷ 12

Метрична (m³):

(Thk_mm × W_mm × L_mm) ÷ 1,000,000,000

*Изчислява се чрез преобразуване на мм в метри.

Practical examples

One shelf board: A 1 in x 12 in x 6 ft board is 6 BF. At $5 per BF with 10% waste, the estimate is $33.

Metric hardwood order: A 25 mm x 150 mm x 2400 mm board is about 0.009 m³, or 3.8 BF before waste.

Common mistakes

Mixing length units: In imperial mode, length is in feet while thickness and width are in inches. If all three values are inches, the result will be 12 times too high.

Using nominal size by accident: Board-foot pricing often follows nominal lumber size. For a shop estimate, measure the actual board when that is what you will cut.

Forgetting waste: Add extra material for trimming, defects, grain choice, and mistakes. Raise the waste allowance for rough or figured boards.

Tips

Keep rough and surfaced boards separate: They may be priced or measured differently. Add them as separate rows so the list is easier to check.

Save before comparing options: Save one calculation, change the species or waste allowance, then save the new version for a quick side-by-side check.

Често задавани въпроси

Защо моят BF се различава от магазина?

Дърводелските цехове често смятат по 'номинални' размери преди сушене. Винаги мерете реалната дъска.

Колко фира да добавя?

За чист материал 10-15% е стандарт. За необработен, предвидете 20-30%.