PENGERJAAN KAYU

Kalkulator Board Foot & Estimasi Biaya Kayu

Kalkulator Board Foot (BF) gratis untuk tukang kayu. Hitung volume kayu, estimasi biaya proyek, dan hitung persentase limbah secara instan.

Pengaturan Proyek
$
%

Turn this off if you want to price only the exact boards listed.

Switching units converts the current board list.

Tambah Kayu
No data
Add at least one board to see volume and cost.
Pratinjau Papan 3D
Pratinjau Papan 3D1 Papan | 0 Tumpukan
Tarik untuk memutar. Menampilkan dimensi papan yang sedang ditambahkan.
Rincian Potongan
Jenis Kayu (Opsional)DimensiVolumeBiaya
Daftar kayu Anda kosong
Saved on this device

Save project estimates you may want to compare or reuse later.

Keeps the latest 10 calculations in this browser.

No data
No saved lumber calculations yet.

Panduan & Informasi

Cara Menggunakan Alat Ini

  1. Pengaturan Global: Pilih sistem satuan Anda (Metrik atau Imperial), harga, dan persentase limbah yang diharapkan.
  2. Dimensi Papan: Masukkan dimensi untuk setiap papan. Pratinjau 3D akan menunjukkan bentuknya.
  3. Tinjauan: Lihat total volume dan estimasi biaya pada tabel ringkasan.

Apa itu Board Foot?

Board Foot (BF) adalah satuan volume. 1 BF = 144 inci kubik (12x12x1).

Dalam sistem Metrik, kita cukup menghitung Meter Kubik (m³).

Rumus Perhitungan

Imperial (BF):

(Thk_in × W_in × L_ft) ÷ 12

Metrik (m³):

(Thk_mm × W_mm × L_mm) ÷ 1,000,000,000

*Dihitung dengan mengubah mm ke meter.

Practical examples

One shelf board: A 1 in x 12 in x 6 ft board is 6 BF. At $5 per BF with 10% waste, the estimate is $33.

Metric hardwood order: A 25 mm x 150 mm x 2400 mm board is about 0.009 m³, or 3.8 BF before waste.

Common mistakes

Mixing length units: In imperial mode, length is in feet while thickness and width are in inches. If all three values are inches, the result will be 12 times too high.

Using nominal size by accident: Board-foot pricing often follows nominal lumber size. For a shop estimate, measure the actual board when that is what you will cut.

Forgetting waste: Add extra material for trimming, defects, grain choice, and mistakes. Raise the waste allowance for rough or figured boards.

Tips

Keep rough and surfaced boards separate: They may be priced or measured differently. Add them as separate rows so the list is easier to check.

Save before comparing options: Save one calculation, change the species or waste allowance, then save the new version for a quick side-by-side check.

Pertanyaan Umum

Mengapa BF saya berbeda dari toko?

Tempat penggergajian kayu sering menghitung berdasarkan dimensi 'nominal' basah sebelum pengeringan. Selalu ukur papan yang sebenarnya.

Berapa banyak limbah yang harus saya tambahkan?

Untuk kayu bersih, 10-15% adalah standar. Untuk kayu gergajian kasar atau bermotif, hitung 20-30%.