Calculator gratuit pentru volumul de cherestea în Board Feet. Estimați costurile proiectului și pierderile de material.
Turn this off if you want to price only the exact boards listed.
Switching units converts the current board list.
Save project estimates you may want to compare or reuse later.
Keeps the latest 10 calculations in this browser.
Un Board Foot (BF) este o unitate de volum. 1 BF = 144 țoli cubi.
În sistemul metric, calculăm pur și simplu metri cubi (m³).
Imperial (BF):
(Thk_in × W_in × L_ft) ÷ 12Metric (m³):
(Thk_mm × W_mm × L_mm) ÷ 1,000,000,000*Calculat prin convertirea mm în metri.
One shelf board: A 1 in x 12 in x 6 ft board is 6 BF. At $5 per BF with 10% waste, the estimate is $33.
Metric hardwood order: A 25 mm x 150 mm x 2400 mm board is about 0.009 m³, or 3.8 BF before waste.
Mixing length units: In imperial mode, length is in feet while thickness and width are in inches. If all three values are inches, the result will be 12 times too high.
Using nominal size by accident: Board-foot pricing often follows nominal lumber size. For a shop estimate, measure the actual board when that is what you will cut.
Forgetting waste: Add extra material for trimming, defects, grain choice, and mistakes. Raise the waste allowance for rough or figured boards.
Keep rough and surfaced boards separate: They may be priced or measured differently. Add them as separate rows so the list is easier to check.
Save before comparing options: Save one calculation, change the species or waste allowance, then save the new version for a quick side-by-side check.
Depozitele calculează adesea pe baza dimensiunilor 'nominale' verzi. Măsurați întotdeauna scândura reală.
Pentru cherestea curată, 10-15% este standard. Pentru lemn brut, calculați 20-30%.